ich nutze den Busmaster an einem Debian Linux-Rechner. Seit gestern morgen sind leider alle 1-wire Sensoren verschwunden (ich habe zu der Zeit geschlafen, bin also unschuldig ).
Bevor ich anfange jetzt den Bus anzufassen, einen einzelnen Sensor nur dranhänge wollte ich hier kurz nachfragen, ob es Dinge gibt, die ich besser vorher noch checken sollte...
root@home:~# owget / /bus.1 /uncached /settings /system /statistics /structure root@home:~# rd@home:~$ for i in $(owget /bus.1/interface/statistics); do > echo $i; owget $i; echo; done /bus.1/interface/statistics/bus_time 0.000614 /bus.1/interface/statistics/close_errors 0 /bus.1/interface/statistics/detect_errors 0 /bus.1/interface/statistics/elapsed_time 2351 /bus.1/interface/statistics/errors 0 /bus.1/interface/statistics/locks 88 /bus.1/interface/statistics/open_errors 0 /bus.1/interface/statistics/overdrive /bus.1/interface/statistics/overdrive/attempts /bus.1/interface/statistics/overdrive/failures /bus.1/interface/statistics/program_errors 0 /bus.1/interface/statistics/pullup_errors 0 /bus.1/interface/statistics/read_errors 0 /bus.1/interface/statistics/reconnect_errors 0 /bus.1/interface/statistics/reconnects 0 /bus.1/interface/statistics/reset_errors 0 /bus.1/interface/statistics/resets 0 /bus.1/interface/statistics/search_errors /bus.1/interface/statistics/search_errors/error_pass_1 /bus.1/interface/statistics/search_errors/error_pass_2 /bus.1/interface/statistics/search_errors/error_pass_3 /bus.1/interface/statistics/select_errors 0 /bus.1/interface/statistics/shorts 0 /bus.1/interface/statistics/status_errors 0 /bus.1/interface/statistics/timeouts 0 /bus.1/interface/statistics/unlocks 100 /bus.1/interface/statistics/write_errors 0 rd@home:~Kann ich den PBM reseten ohne einen Power-Cycle zu fahren?
Danke und Gruß
Rainer