Wir stellen ein allgemeines Update zur Verfügung:
"OS Update für alle Versionen und alle Modelle"
Wir stellen ein Betriebssystem Update für Debian zur Verfügung für alle Versionen, Architekturen und Modelle des Timberwolf Servers. Es handelt sich fast überwiegend um Sicherheitsupdates.
Vorgesehen für:
- Timberwolf Server der Serien 3xx und 9xx mit Hauptversion V 2.0
- Timberwolf Server der Serien 3xx und 9xx mit jeder Insider Preview zur V 3.0
- Timberwolf Server der Serien 21xx, 24xx, 25xx und 26xx mit Hauptversion V 2.0
- Timberwolf Server der Serien 21xx, 24xx, 25xx und 26xx mit jeder Insider Preview zur V 3.0
Hinweis: Bitte treten Sie den Telegram-Kanälen für Hauptversionen bzw. Insider bei, damit Sie über neue Versionen direkt informiert werden.
+++ Wichtige Hinweise +++ BITTE LESEN +++ Wichtige Hinweise +++ BITTE LESEN +++ Wichtige Hinweise +++ BITTE LESEN +++
Hinweis: Aus technischen Gründen stellen wir das Update bereits jetzt zur Verfügung, wir empfehlen eine Installation jedoch erst ab Montag, den 27. Dezember 2021, weil wir bei Problemen sonst nicht helfen können.
Dieses OS-Update hat keine Versionsnummer und kein äußeres Kennzeichen.
Vorgehensweise für dieses Update:
- Restart für klaren Status: Bitte starten Sie den Timberwolf Server zunächst einmal neu und prüfen Sie bitte, ob die gesamte Anlage nach dem Neustart einwandfrei funktioniert. Falls Probleme auftreten, suchen Sie bitte erst die Ursache. Es ist für eine eventuelle Fehlersuche günstig, wenn klar getrennt werden kann zwischen Problemen die alleine durch den Neustart einer Anlage oder Teilen davon bedingt sind von denjenigen Problemen, die tatsächlich durch das Upgrade (der womöglich einen Neustart inkludiert) entstanden sind.
- Backup vor dem Upgrade: Führen Sie VOR dem Update / Upgrade ein komplettes Backup aus.
- Update / Upgrade durchführen: Je nachdem, von welcher Version aus Sie das Upgrade auf diese Version vornehmen, kann es sein, dass das Update mehrmals gestartet werden muss. Dies ist insbesondere dann erforderlich, wenn zunächst ein Update der Update-Software notwendig ist um danach das eigentliche Update zu installieren. Bitte daher ggfls. mehrmals den Update-Prozess anstoßen, bis kein Update mehr angeboten wird. Da dies ein Update des Betriebssystems ist, kann dieses Update durchaus bis 20 Minuten dauern. Verlassen Sie die Seite mit dem Update während des Ablaufes nicht.
- Neustart des Systems: Führen Sie (insbesondere bei Insider Versionen) anschließend einen Neustart des Servers durch, damit alle Änderungen optimal wirksam werden und alle Module in der richtigen Reihenfolge gestartet sind.
- Backup der neuen Software: Wir empfehlen ein anschließendes erneutes Backup nach dem erfolgen Update. Bitte löschen Sie das Backup, das Sie VOR dem Update angefertigt hatten jedoch nicht.
Bekannte Probleme:
Doppelte bzw. mehrfache MAC-Adressen: Mehrere Kunden haben von Problemen in der IP-Kommunikation aus Containern berichtet. Diese sind auf doppelte MAC-Adressen für die Container zurückzuführen. Die genaue Ursache ist nicht gefunden, dürfte in jedoch in Docker und / oder Portainer liegen und steht NICHT im Zusammenhang mit diesem Update selbst, sondern nur mit dem Neustart. Dies tritt auch bei sonstigen Neustarts auf, unabhängig ob ein Update zuvor installiert wurde oder nicht. Wir haben daher u.a. die Darstellung im Container Management ab Version 1.6 erheblich verbessert, doppelte MAC-Adressen werden gelb unterlegt dargestellt. Wir bitten alle Nutzer, die mehr als eine Container nutzen, die Vergabe der MAC-Adressen NACH JEDEM EINZELNEN NEUSTART zu prüfen und in Portainer ggfls. anzupassen, so dass diese eindeutig sind.
Abhilfe: Stellen Sie auf MacVLAN um (Server wie Docker Container), hier kommt es nicht zu diesem Fehler
+++ Wichtige Hinweise +++ BITTE LESEN +++ Wichtige Hinweise +++ BITTE LESEN +++ Wichtige Hinweise +++ BITTE LESEN +++
Changelog für das OS-Update:
Das Update ist vom Stand 22. November 2021
Changelog, wenn Sie von der Hauptversion 2.0 aus dieses Betriebssystem-Update durchführen
Arch | Package | Version in A | Version in B
! all | ca-certificates | 20200601~deb9u1 | 20200601~deb9u2
! all | dnsmasq | 2.76-5+deb9u2 | 2.76-5+deb9u3
! all | exim4-config | 4.89-2+deb9u7 | 4.89-2+deb9u8
! all | krb5-locales | 1.15-1+deb9u2 | 1.15-1+deb9u3
! all | libldap-common | 2.4.44+dfsg-5+deb9u6 | 2.4.44+dfsg-5+deb9u8
! all | libx11-data | 2:1.6.4-3+deb9u3 | 2:1.6.4-3+deb9u4
- all | linux-headers-4.9.0-14-common | 4.9.240-2 | -
+ all | linux-headers-4.9.0-16-common | - | 4.9.272-2
! all | mariadb-common | 10.1.47-0+deb9u1 | 10.1.48-0+deb9u2
! all | nginx | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! all | nginx-common | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! all | python-apt-common | 1.4.2 | 1.4.3
! all | python3-urllib3 | 1.19.1-1 | 1.19.1-1+deb9u1
! all | tzdata | 2020d-0+deb9u1 | 2021a-0+deb9u2
! amd64 | bind9-host | 1:9.10.3.dfsg.P4-12.3+deb9u7 | 1:9.10.3.dfsg.P4-12.3+deb9u10
! amd64 | busybox | 1:1.22.0-19+b3 | 1:1.22.0-19+deb9u2
! amd64 | busybox-static | 1:1.22.0-19+b3 | 1:1.22.0-19+deb9u2
! amd64 | cron | 3.0pl1-128+deb9u1 | 3.0pl1-128+deb9u2
! amd64 | dnsmasq-base | 2.76-5+deb9u2 | 2.76-5+deb9u3
! amd64 | docker-ce | 5:19.03.14~3-0~debian-stretch | 5:19.03.15~3-0~debian-stretch
! amd64 | docker-ce-cli | 5:19.03.14~3-0~debian-stretch | 5:19.03.15~3-0~debian-stretch
! amd64 | exim4-base | 4.89-2+deb9u7 | 4.89-2+deb9u8
! amd64 | exim4-daemon-light | 4.89-2+deb9u7 | 4.89-2+deb9u8
! amd64 | hostapd | 2:2.4-1+deb9u7 | 2:2.4-1+deb9u9
! amd64 | isc-dhcp-client | 4.3.5-3+deb9u1 | 4.3.5-3+deb9u2
! amd64 | isc-dhcp-common | 4.3.5-3+deb9u1 | 4.3.5-3+deb9u2
! amd64 | klibc-utils | 2.0.4-9 | 2.0.4-9+deb9u1
! amd64 | libbind9-140 | 1:9.10.3.dfsg.P4-12.3+deb9u7 | 1:9.10.3.dfsg.P4-12.3+deb9u10
! amd64 | libbsd0 | 0.8.3-1 | 0.8.3-1+deb9u1
! amd64 | libcurl3-gnutls | 7.52.1-5+deb9u12 | 7.52.1-5+deb9u16
! amd64 | libdns-export162 | 1:9.10.3.dfsg.P4-12.3+deb9u7 | 1:9.10.3.dfsg.P4-12.3+deb9u10
! amd64 | libdns162 | 1:9.10.3.dfsg.P4-12.3+deb9u7 | 1:9.10.3.dfsg.P4-12.3+deb9u10
! amd64 | libelf1 | 0.168-1 | 0.168-1+deb9u1
! amd64 | libgcrypt20 | 1.7.6-2+deb9u3 | 1.7.6-2+deb9u4
! amd64 | libgnutls30 | 3.5.8-5+deb9u5 | 3.5.8-5+deb9u6
! amd64 | libgssapi-krb5-2 | 1.15-1+deb9u2 | 1.15-1+deb9u3
! amd64 | libhogweed4 | 3.3-1+b2 | 3.3-1+deb9u1
! amd64 | libicu57 | 57.1-6+deb9u4 | 57.1-6+deb9u5
! amd64 | libisc-export160 | 1:9.10.3.dfsg.P4-12.3+deb9u7 | 1:9.10.3.dfsg.P4-12.3+deb9u10
! amd64 | libisc160 | 1:9.10.3.dfsg.P4-12.3+deb9u7 | 1:9.10.3.dfsg.P4-12.3+deb9u10
! amd64 | libisccc140 | 1:9.10.3.dfsg.P4-12.3+deb9u7 | 1:9.10.3.dfsg.P4-12.3+deb9u10
! amd64 | libisccfg140 | 1:9.10.3.dfsg.P4-12.3+deb9u7 | 1:9.10.3.dfsg.P4-12.3+deb9u10
! amd64 | libk5crypto3 | 1.15-1+deb9u2 | 1.15-1+deb9u3
! amd64 | libklibc | 2.0.4-9 | 2.0.4-9+deb9u1
! amd64 | libkrb5-3 | 1.15-1+deb9u2 | 1.15-1+deb9u3
! amd64 | libkrb5support0 | 1.15-1+deb9u2 | 1.15-1+deb9u3
! amd64 | libldap-2.4-2 | 2.4.44+dfsg-5+deb9u6 | 2.4.44+dfsg-5+deb9u8
! amd64 | liblwres141 | 1:9.10.3.dfsg.P4-12.3+deb9u7 | 1:9.10.3.dfsg.P4-12.3+deb9u10
! amd64 | liblz4-1 | 0.0~r131-2+b1 | 0.0~r131-2+deb9u1
! amd64 | libmariadbclient18 | 10.1.47-0+deb9u1 | 10.1.48-0+deb9u2
! amd64 | libnettle6 | 3.3-1+b2 | 3.3-1+deb9u1
! amd64 | libnghttp2-14 | 1.18.1-1+deb9u1 | 1.18.1-1+deb9u2
! amd64 | libnginx-mod-http-auth-pam | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! amd64 | libnginx-mod-http-cache-purge | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! amd64 | libnginx-mod-http-dav-ext | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! amd64 | libnginx-mod-http-echo | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! amd64 | libnginx-mod-http-fancyindex | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! amd64 | libnginx-mod-http-geoip | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! amd64 | libnginx-mod-http-headers-more-filter | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! amd64 | libnginx-mod-http-image-filter | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! amd64 | libnginx-mod-http-lua | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! amd64 | libnginx-mod-http-ndk | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! amd64 | libnginx-mod-http-perl | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! amd64 | libnginx-mod-http-subs-filter | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! amd64 | libnginx-mod-http-uploadprogress | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! amd64 | libnginx-mod-http-upstream-fair | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! amd64 | libnginx-mod-http-xslt-filter | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! amd64 | libnginx-mod-mail | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! amd64 | libnginx-mod-nchan | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! amd64 | libnginx-mod-stream | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! amd64 | libntfs-3g871 | 1:2016.2.22AR.1+dfsg-1+deb9u1 | 1:2016.2.22AR.1+dfsg-1+deb9u2
! amd64 | libp11-kit0 | 0.23.3-2 | 0.23.3-2+deb9u1
! amd64 | libpam-systemd | 232-25+deb9u12 | 232-25+deb9u13
! amd64 | libpython2.7 | 2.7.13-2+deb9u4 | 2.7.13-2+deb9u5
! amd64 | libpython2.7-minimal | 2.7.13-2+deb9u4 | 2.7.13-2+deb9u5
! amd64 | libpython2.7-stdlib | 2.7.13-2+deb9u4 | 2.7.13-2+deb9u5
! amd64 | libpython3.5-minimal | 3.5.3-1+deb9u3 | 3.5.3-1+deb9u5
! amd64 | libpython3.5-stdlib | 3.5.3-1+deb9u3 | 3.5.3-1+deb9u5
! amd64 | libssl1.0.2 | 1.0.2u-1~deb9u3 | 1.0.2u-1~deb9u6
! amd64 | libssl1.1 | 1.1.0l-1~deb9u2 | 1.1.0l-1~deb9u4
! amd64 | libsystemd0 | 232-25+deb9u12 | 232-25+deb9u13
! amd64 | libtiff5 | 4.0.8-2+deb9u5 | 4.0.8-2+deb9u7
! amd64 | libudev1 | 232-25+deb9u12 | 232-25+deb9u13
! amd64 | libwebp6 | 0.5.2-1 | 0.5.2-1+deb9u1
! amd64 | libx11-6 | 2:1.6.4-3+deb9u3 | 2:1.6.4-3+deb9u4
! amd64 | libxml2 | 2.9.4+dfsg1-2.2+deb9u3 | 2.9.4+dfsg1-2.2+deb9u5
! amd64 | libzmq5 | 4.2.1-4+deb9u3 | 4.2.1-4+deb9u4
! amd64 | linux-compiler-gcc-6-x86 | 4.9.240-2 | 4.9.272-2
- amd64 | linux-headers-4.9.0-14-amd64 | 4.9.240-2 | -
+ amd64 | linux-headers-4.9.0-16-amd64 | - | 4.9.272-2
! amd64 | linux-headers-amd64 | 4.9+80+deb9u12 | 4.9+80+deb9u14
- amd64 | linux-image-4.9.0-14-amd64 | 4.9.240-2 | -
+ amd64 | linux-image-4.9.0-16-amd64 | - | 4.9.272-2
! amd64 | linux-image-amd64 | 4.9+80+deb9u12 | 4.9+80+deb9u14
! amd64 | linux-kbuild-4.9 | 4.9.240-2 | 4.9.272-2
! amd64 | linux-libc-dev | 4.9.240-2 | 4.9.272-2
! amd64 | login | 1:4.4-4.1 | 1:4.4-4.1+deb9u1
! amd64 | mariadb-client-10.1 | 10.1.47-0+deb9u1 | 10.1.48-0+deb9u2
! amd64 | mariadb-client-core-10.1 | 10.1.47-0+deb9u1 | 10.1.48-0+deb9u2
! amd64 | mariadb-server-10.1 | 10.1.47-0+deb9u1 | 10.1.48-0+deb9u2
! amd64 | mariadb-server-core-10.1 | 10.1.47-0+deb9u1 | 10.1.48-0+deb9u2
! amd64 | nginx-extras | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! amd64 | nginx-full | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! amd64 | nginx-light | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! amd64 | ntfs-3g | 1:2016.2.22AR.1+dfsg-1+deb9u1 | 1:2016.2.22AR.1+dfsg-1+deb9u2
! amd64 | openssl | 1.1.0l-1~deb9u2 | 1.1.0l-1~deb9u4
! amd64 | passwd | 1:4.4-4.1 | 1:4.4-4.1+deb9u1
! amd64 | python2.7 | 2.7.13-2+deb9u4 | 2.7.13-2+deb9u5
! amd64 | python2.7-minimal | 2.7.13-2+deb9u4 | 2.7.13-2+deb9u5
! amd64 | python3-apt | 1.4.2 | 1.4.3
! amd64 | python3.5 | 3.5.3-1+deb9u3 | 3.5.3-1+deb9u5
! amd64 | python3.5-minimal | 3.5.3-1+deb9u3 | 3.5.3-1+deb9u5
! amd64 | sudo | 1.8.19p1-2.1+deb9u2 | 1.8.19p1-2.1+deb9u3
! amd64 | sudo-ldap | 1.8.19p1-2.1+deb9u2 | 1.8.19p1-2.1+deb9u3
! amd64 | systemd | 232-25+deb9u12 | 232-25+deb9u13
! amd64 | systemd-sysv | 232-25+deb9u12 | 232-25+deb9u13
! amd64 | udev | 232-25+deb9u12 | 232-25+deb9u13
! amd64 | wpasupplicant | 2:2.4-1+deb9u7 | 2:2.4-1+deb9u9
! armhf | bind9-host | 1:9.10.3.dfsg.P4-12.3+deb9u7 | 1:9.10.3.dfsg.P4-12.3+deb9u10
! armhf | busybox | 1:1.22.0-19+b3 | 1:1.22.0-19+deb9u2
! armhf | busybox-static | 1:1.22.0-19+b3 | 1:1.22.0-19+deb9u2
! armhf | cron | 3.0pl1-128+deb9u1 | 3.0pl1-128+deb9u2
! armhf | dnsmasq-base | 2.76-5+deb9u2 | 2.76-5+deb9u3
! armhf | docker-ce | 5:19.03.14~3-0~debian-stretch | 5:19.03.15~3-0~debian-stretch
! armhf | docker-ce-cli | 5:19.03.14~3-0~debian-stretch | 5:19.03.15~3-0~debian-stretch
! armhf | exim4-base | 4.89-2+deb9u7 | 4.89-2+deb9u8
! armhf | exim4-daemon-light | 4.89-2+deb9u7 | 4.89-2+deb9u8
! armhf | hostapd | 2:2.4-1+deb9u7 | 2:2.4-1+deb9u9
! armhf | isc-dhcp-client | 4.3.5-3+deb9u1 | 4.3.5-3+deb9u2
! armhf | isc-dhcp-common | 4.3.5-3+deb9u1 | 4.3.5-3+deb9u2
! armhf | klibc-utils | 2.0.4-9 | 2.0.4-9+deb9u1
! armhf | libbind9-140 | 1:9.10.3.dfsg.P4-12.3+deb9u7 | 1:9.10.3.dfsg.P4-12.3+deb9u10
! armhf | libbsd0 | 0.8.3-1 | 0.8.3-1+deb9u1
! armhf | libcurl3-gnutls | 7.52.1-5+deb9u12 | 7.52.1-5+deb9u16
! armhf | libdns-export162 | 1:9.10.3.dfsg.P4-12.3+deb9u7 | 1:9.10.3.dfsg.P4-12.3+deb9u10
! armhf | libdns162 | 1:9.10.3.dfsg.P4-12.3+deb9u7 | 1:9.10.3.dfsg.P4-12.3+deb9u10
! armhf | libelf1 | 0.168-1 | 0.168-1+deb9u1
! armhf | libgcrypt20 | 1.7.6-2+deb9u3 | 1.7.6-2+deb9u4
! armhf | libgnutls30 | 3.5.8-5+deb9u5 | 3.5.8-5+deb9u6
! armhf | libgssapi-krb5-2 | 1.15-1+deb9u2 | 1.15-1+deb9u3
! armhf | libhogweed4 | 3.3-1+b2 | 3.3-1+deb9u1
! armhf | libicu57 | 57.1-6+deb9u4 | 57.1-6+deb9u5
! armhf | libisc-export160 | 1:9.10.3.dfsg.P4-12.3+deb9u7 | 1:9.10.3.dfsg.P4-12.3+deb9u10
! armhf | libisc160 | 1:9.10.3.dfsg.P4-12.3+deb9u7 | 1:9.10.3.dfsg.P4-12.3+deb9u10
! armhf | libisccc140 | 1:9.10.3.dfsg.P4-12.3+deb9u7 | 1:9.10.3.dfsg.P4-12.3+deb9u10
! armhf | libisccfg140 | 1:9.10.3.dfsg.P4-12.3+deb9u7 | 1:9.10.3.dfsg.P4-12.3+deb9u10
! armhf | libk5crypto3 | 1.15-1+deb9u2 | 1.15-1+deb9u3
! armhf | libklibc | 2.0.4-9 | 2.0.4-9+deb9u1
! armhf | libkrb5-3 | 1.15-1+deb9u2 | 1.15-1+deb9u3
! armhf | libkrb5support0 | 1.15-1+deb9u2 | 1.15-1+deb9u3
! armhf | libldap-2.4-2 | 2.4.44+dfsg-5+deb9u6 | 2.4.44+dfsg-5+deb9u8
! armhf | liblwres141 | 1:9.10.3.dfsg.P4-12.3+deb9u7 | 1:9.10.3.dfsg.P4-12.3+deb9u10
! armhf | liblz4-1 | 0.0~r131-2+b1 | 0.0~r131-2+deb9u1
! armhf | libmariadbclient18 | 10.1.47-0+deb9u1 | 10.1.48-0+deb9u2
! armhf | libnettle6 | 3.3-1+b2 | 3.3-1+deb9u1
! armhf | libnghttp2-14 | 1.18.1-1+deb9u1 | 1.18.1-1+deb9u2
! armhf | libnginx-mod-http-auth-pam | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! armhf | libnginx-mod-http-cache-purge | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! armhf | libnginx-mod-http-dav-ext | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! armhf | libnginx-mod-http-echo | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! armhf | libnginx-mod-http-fancyindex | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! armhf | libnginx-mod-http-geoip | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! armhf | libnginx-mod-http-headers-more-filter | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! armhf | libnginx-mod-http-image-filter | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! armhf | libnginx-mod-http-lua | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! armhf | libnginx-mod-http-ndk | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! armhf | libnginx-mod-http-perl | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! armhf | libnginx-mod-http-subs-filter | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! armhf | libnginx-mod-http-uploadprogress | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! armhf | libnginx-mod-http-upstream-fair | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! armhf | libnginx-mod-http-xslt-filter | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! armhf | libnginx-mod-mail | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! armhf | libnginx-mod-nchan | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! armhf | libnginx-mod-stream | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! armhf | libntfs-3g871 | 1:2016.2.22AR.1+dfsg-1+deb9u1 | 1:2016.2.22AR.1+dfsg-1+deb9u2
! armhf | libp11-kit0 | 0.23.3-2 | 0.23.3-2+deb9u1
! armhf | libpam-systemd | 232-25+deb9u12 | 232-25+deb9u13
! armhf | libpython2.7 | 2.7.13-2+deb9u4 | 2.7.13-2+deb9u5
! armhf | libpython2.7-minimal | 2.7.13-2+deb9u4 | 2.7.13-2+deb9u5
! armhf | libpython2.7-stdlib | 2.7.13-2+deb9u4 | 2.7.13-2+deb9u5
! armhf | libpython3.5-minimal | 3.5.3-1+deb9u3 | 3.5.3-1+deb9u5
! armhf | libpython3.5-stdlib | 3.5.3-1+deb9u3 | 3.5.3-1+deb9u5
! armhf | libssl1.0.2 | 1.0.2u-1~deb9u3 | 1.0.2u-1~deb9u6
! armhf | libssl1.1 | 1.1.0l-1~deb9u2 | 1.1.0l-1~deb9u4
! armhf | libsystemd0 | 232-25+deb9u12 | 232-25+deb9u13
! armhf | libtiff5 | 4.0.8-2+deb9u5 | 4.0.8-2+deb9u7
! armhf | libudev1 | 232-25+deb9u12 | 232-25+deb9u13
! armhf | libwebp6 | 0.5.2-1 | 0.5.2-1+deb9u1
! armhf | libx11-6 | 2:1.6.4-3+deb9u3 | 2:1.6.4-3+deb9u4
! armhf | libxml2 | 2.9.4+dfsg1-2.2+deb9u3 | 2.9.4+dfsg1-2.2+deb9u5
! armhf | libzmq5 | 4.2.1-4+deb9u3 | 4.2.1-4+deb9u4
! armhf | linux-kbuild-4.9 | 4.9.240-2 | 4.9.272-2
! armhf | linux-libc-dev | 4.9.240-2 | 4.9.272-2
! armhf | login | 1:4.4-4.1 | 1:4.4-4.1+deb9u1
! armhf | mariadb-client-10.1 | 10.1.47-0+deb9u1 | 10.1.48-0+deb9u2
! armhf | mariadb-client-core-10.1 | 10.1.47-0+deb9u1 | 10.1.48-0+deb9u2
! armhf | mariadb-server-10.1 | 10.1.47-0+deb9u1 | 10.1.48-0+deb9u2
! armhf | mariadb-server-core-10.1 | 10.1.47-0+deb9u1 | 10.1.48-0+deb9u2
! armhf | nginx-extras | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! armhf | nginx-full | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! armhf | nginx-light | 1.10.3-1+deb9u5 | 1.10.3-1+deb9u7
! armhf | ntfs-3g | 1:2016.2.22AR.1+dfsg-1+deb9u1 | 1:2016.2.22AR.1+dfsg-1+deb9u2
! armhf | openssl | 1.1.0l-1~deb9u2 | 1.1.0l-1~deb9u4
! armhf | passwd | 1:4.4-4.1 | 1:4.4-4.1+deb9u1
! armhf | python2.7 | 2.7.13-2+deb9u4 | 2.7.13-2+deb9u5
! armhf | python2.7-minimal | 2.7.13-2+deb9u4 | 2.7.13-2+deb9u5
! armhf | python3-apt | 1.4.2 | 1.4.3
! armhf | python3.5 | 3.5.3-1+deb9u3 | 3.5.3-1+deb9u5
! armhf | python3.5-minimal | 3.5.3-1+deb9u3 | 3.5.3-1+deb9u5
! armhf | sudo | 1.8.19p1-2.1+deb9u2 | 1.8.19p1-2.1+deb9u3
! armhf | sudo-ldap | 1.8.19p1-2.1+deb9u2 | 1.8.19p1-2.1+deb9u3
! armhf | systemd | 232-25+deb9u12 | 232-25+deb9u13
! armhf | systemd-sysv | 232-25+deb9u12 | 232-25+deb9u13
! armhf | udev | 232-25+deb9u12 | 232-25+deb9u13
! armhf | wpasupplicant | 2:2.4-1+deb9u7 | 2:2.4-1+deb9u9
Changelog, wenn Sie von einer Insider Version zur 3.0 dieses Betriebssystem-Update durchführen
Mit IP1 zur V 3.0 waren bereits sehr viele OS-Updates enthalten, deshalb werden hier nur die seither verfügbaren Updates installiert.
Arch | Package | Version in A | Version in B
! all | krb5-locales | 1.15-1+deb9u2 | 1.15-1+deb9u3
! all | tzdata | 2021a-0+deb9u1 | 2021a-0+deb9u2
! amd64 | bind9-host | 1:9.10.3.dfsg.P4-12.3+deb9u9 | 1:9.10.3.dfsg.P4-12.3+deb9u10
! amd64 | cron | 3.0pl1-128+deb9u1 | 3.0pl1-128+deb9u2
! amd64 | libbind9-140 | 1:9.10.3.dfsg.P4-12.3+deb9u9 | 1:9.10.3.dfsg.P4-12.3+deb9u10
! amd64 | libcurl3-gnutls | 7.52.1-5+deb9u14 | 7.52.1-5+deb9u16
! amd64 | libdns-export162 | 1:9.10.3.dfsg.P4-12.3+deb9u9 | 1:9.10.3.dfsg.P4-12.3+deb9u10
! amd64 | libdns162 | 1:9.10.3.dfsg.P4-12.3+deb9u9 | 1:9.10.3.dfsg.P4-12.3+deb9u10
! amd64 | libelf1 | 0.168-1 | 0.168-1+deb9u1
! amd64 | libgnutls30 | 3.5.8-5+deb9u5 | 3.5.8-5+deb9u6
! amd64 | libgssapi-krb5-2 | 1.15-1+deb9u2 | 1.15-1+deb9u3
! amd64 | libhogweed4 | 3.3-1+b2 | 3.3-1+deb9u1
! amd64 | libicu57 | 57.1-6+deb9u4 | 57.1-6+deb9u5
! amd64 | libisc-export160 | 1:9.10.3.dfsg.P4-12.3+deb9u9 | 1:9.10.3.dfsg.P4-12.3+deb9u10
! amd64 | libisc160 | 1:9.10.3.dfsg.P4-12.3+deb9u9 | 1:9.10.3.dfsg.P4-12.3+deb9u10
! amd64 | libisccc140 | 1:9.10.3.dfsg.P4-12.3+deb9u9 | 1:9.10.3.dfsg.P4-12.3+deb9u10
! amd64 | libisccfg140 | 1:9.10.3.dfsg.P4-12.3+deb9u9 | 1:9.10.3.dfsg.P4-12.3+deb9u10
! amd64 | libk5crypto3 | 1.15-1+deb9u2 | 1.15-1+deb9u3
! amd64 | libkrb5-3 | 1.15-1+deb9u2 | 1.15-1+deb9u3
! amd64 | libkrb5support0 | 1.15-1+deb9u2 | 1.15-1+deb9u3
! amd64 | liblwres141 | 1:9.10.3.dfsg.P4-12.3+deb9u9 | 1:9.10.3.dfsg.P4-12.3+deb9u10
! amd64 | libnettle6 | 3.3-1+b2 | 3.3-1+deb9u1
! amd64 | libnghttp2-14 | 1.18.1-1+deb9u1 | 1.18.1-1+deb9u2
! amd64 | libntfs-3g871 | 1:2016.2.22AR.1+dfsg-1+deb9u1 | 1:2016.2.22AR.1+dfsg-1+deb9u2
! amd64 | libpython3.5-minimal | 3.5.3-1+deb9u4 | 3.5.3-1+deb9u5
! amd64 | libpython3.5-stdlib | 3.5.3-1+deb9u4 | 3.5.3-1+deb9u5
! amd64 | libssl1.0.2 | 1.0.2u-1~deb9u4 | 1.0.2u-1~deb9u6
! amd64 | libssl1.1 | 1.1.0l-1~deb9u3 | 1.1.0l-1~deb9u4
! amd64 | libtiff5 | 4.0.8-2+deb9u6 | 4.0.8-2+deb9u7
! amd64 | ntfs-3g | 1:2016.2.22AR.1+dfsg-1+deb9u1 | 1:2016.2.22AR.1+dfsg-1+deb9u2
! amd64 | openssl | 1.1.0l-1~deb9u3 | 1.1.0l-1~deb9u4
! amd64 | python3.5 | 3.5.3-1+deb9u4 | 3.5.3-1+deb9u5
! amd64 | python3.5-minimal | 3.5.3-1+deb9u4 | 3.5.3-1+deb9u5
! armhf | bind9-host | 1:9.10.3.dfsg.P4-12.3+deb9u9 | 1:9.10.3.dfsg.P4-12.3+deb9u10
! armhf | cron | 3.0pl1-128+deb9u1 | 3.0pl1-128+deb9u2
! armhf | libbind9-140 | 1:9.10.3.dfsg.P4-12.3+deb9u9 | 1:9.10.3.dfsg.P4-12.3+deb9u10
! armhf | libcurl3-gnutls | 7.52.1-5+deb9u14 | 7.52.1-5+deb9u16
! armhf | libdns-export162 | 1:9.10.3.dfsg.P4-12.3+deb9u9 | 1:9.10.3.dfsg.P4-12.3+deb9u10
! armhf | libdns162 | 1:9.10.3.dfsg.P4-12.3+deb9u9 | 1:9.10.3.dfsg.P4-12.3+deb9u10
! armhf | libelf1 | 0.168-1 | 0.168-1+deb9u1
! armhf | libgnutls30 | 3.5.8-5+deb9u5 | 3.5.8-5+deb9u6
! armhf | libgssapi-krb5-2 | 1.15-1+deb9u2 | 1.15-1+deb9u3
! armhf | libhogweed4 | 3.3-1+b2 | 3.3-1+deb9u1
! armhf | libicu57 | 57.1-6+deb9u4 | 57.1-6+deb9u5
! armhf | libisc-export160 | 1:9.10.3.dfsg.P4-12.3+deb9u9 | 1:9.10.3.dfsg.P4-12.3+deb9u10
! armhf | libisc160 | 1:9.10.3.dfsg.P4-12.3+deb9u9 | 1:9.10.3.dfsg.P4-12.3+deb9u10
! armhf | libisccc140 | 1:9.10.3.dfsg.P4-12.3+deb9u9 | 1:9.10.3.dfsg.P4-12.3+deb9u10
! armhf | libisccfg140 | 1:9.10.3.dfsg.P4-12.3+deb9u9 | 1:9.10.3.dfsg.P4-12.3+deb9u10
! armhf | libk5crypto3 | 1.15-1+deb9u2 | 1.15-1+deb9u3
! armhf | libkrb5-3 | 1.15-1+deb9u2 | 1.15-1+deb9u3
! armhf | libkrb5support0 | 1.15-1+deb9u2 | 1.15-1+deb9u3
! armhf | liblwres141 | 1:9.10.3.dfsg.P4-12.3+deb9u9 | 1:9.10.3.dfsg.P4-12.3+deb9u10
! armhf | libnettle6 | 3.3-1+b2 | 3.3-1+deb9u1
! armhf | libnghttp2-14 | 1.18.1-1+deb9u1 | 1.18.1-1+deb9u2
! armhf | libntfs-3g871 | 1:2016.2.22AR.1+dfsg-1+deb9u1 | 1:2016.2.22AR.1+dfsg-1+deb9u2
! armhf | libpython3.5-minimal | 3.5.3-1+deb9u4 | 3.5.3-1+deb9u5
! armhf | libpython3.5-stdlib | 3.5.3-1+deb9u4 | 3.5.3-1+deb9u5
! armhf | libssl1.0.2 | 1.0.2u-1~deb9u4 | 1.0.2u-1~deb9u6
! armhf | libssl1.1 | 1.1.0l-1~deb9u3 | 1.1.0l-1~deb9u4
! armhf | libtiff5 | 4.0.8-2+deb9u6 | 4.0.8-2+deb9u7
! armhf | ntfs-3g | 1:2016.2.22AR.1+dfsg-1+deb9u1 | 1:2016.2.22AR.1+dfsg-1+deb9u2
! armhf | openssl | 1.1.0l-1~deb9u3 | 1.1.0l-1~deb9u4
! armhf | python3.5 | 3.5.3-1+deb9u4 | 3.5.3-1+deb9u5
! armhf | python3.5-minimal | 3.5.3-1+deb9u4 | 3.5.3-1+deb9u5
Details zu Debian OS Updates
Zu den OS-Updates von Debian erhalten Sie hier weitere Informationen: https://www.debian.org/lts/security/2021/
###########################################################################################################
lg
Stefan Werner